SA6210 Low-Profile Accelerometer
The Metrix SA6210 Low-Profile Accelerometer uses a side-exit cable connection that allows it to be used in physically constrained locations where a top-exit cable design will not fit. The SA6210 offers performance characteristics similar to our SA6200A, but with a slightly wider frequency response and a higher mounted resonant frequency. The table below summarizes the primary characteristics for each of our standard-temperature accelerometer offerings:
|Freq Response (+/- 3dB)||0.5 Hz - 10 kHz||0.5 Hz - 12 kHz||0.2 Hz - 11.5 kHz||0.8 Hz - 15 kHz|
|Mounted Resonance||13 kHz||18 kHz||25 kHz||40 kHz|
A built-in amplifier provides a 100mV/g low-impedance, constant-current output that is compatible with vibration monitoring systems, electronic switches, and 4-20mA signal conditioners.
The sensor consists of a temperature-stabilized piezo-electric core and an amplifier, packaged together in a 316L stainless steel case that is electrically isolated from the sensing circuit. It is mounted using a through-bolt rather than a base-mounted stud, and is available in both ¼-28 and M6 thread sizes. The through-bolt design allows the cable connector to be rotated to any orientation.
Product Aprox. Weight: 145 g (5.1 oz)