3/4” NPT Threaded Hole Probe Holder

Threaded Hole Probe Holder facilitates low-cost mounting through a 3/4” NPT tapped hole.

A standard jam nut is required to provide the locking mechanism.

Material: Stainless Steel. The jam nut is not included; however, it is usually included with the proximity probe. Threads: 1/4"-28.

Model: 9059 based models available as shown in the table below.

Model		Probe Threads	Models Used With
1/2" NPT Threaded Hole Probe Holder	3/4" NPT Threaded Hole Probe Holder	Probe Threads	Models Used With
9059-001	9059-011	1/4" - 28	Any forward mount probe with these threads
9059-002	9059-012	3/8" - 24
9059-003	9059-013	M8 x 1
9059-004	9059-014	M10 x 1

Product Aprox. Weight: 0.1 kg (0.2 lb)

METRIX